39lb/hour LS3/LS7/L76/L92/L99 with EV6 / USCAR Connector
Bosch High Impedance Injectors
injectors flow 39 lbs/hr at 58.0 PSI ( 4 BAR ) and more at higher PSI. In addition,
these units are high-impedance. Despite the high flow rate, they are linear
and controllable at low pulse widths and have been used in ULEV applications!
This allows you to use a larger injector than normally possible without hurting
idle and low speed drive ability. Adding to the flexibility of application,
these units are high-impedance; making them compatible with most ECUs, while
delivering the most flow available in a High-Impedance injector.
injectors are able to function at high fuel pressures and don’t exhibit
the high fuel pressure handling problems found with many other high flow high-impedance
injectors. Many tuners push these injectors to 6 bar and higher.
performance and running quality are enhanced through the optimized spray pattern.
Unlike competitors “pencil stream” high flow injectors; these High
Flow injectors utilize a multi-orifice tip for improved mixture preparation
and atomization. This results in lower BSFC and better idle quality than many
injectors with less flow.
- Genuine, reliable
- Robust Design
- High Impedance
- Low Impedance
performance characteristics with High Impedance Compatibility
- Coil Resistance:
12 Ohms (This high-impedance injector will work with all factory ECM/PCM
- Spray Pattern:
Wide Split Cone, (4 orifice)
Connector: USCAR (New-style V=EV6 / Oval / LS2)
- Fitted with
Viton upper and lower o-rings.
- Static Flow
Rate @ 58.0PSI (300kPa): 39.0 lb/hr = 6.52g/s = 409.5cc/min (+/-3%)
- Overall Length:
33.5mm o-ring seat to seat, 37.5mm o-ring centerline to centerline
- Made for high
pressure, harsh environment turbo & supercharged applications!
- Bosch 0 280
158 051 (0280158051)
- GM# 12576341