TEL: 818-518-9889
We Ship Worldwide

Carbureted BBC "Tuner" Kit (V-7 YSi-Trim, Satin)


Add to Cart:

  • Model: V4GA218-050
  • Manufactured by: Vortech

Please allow 1-5 business days for product to ship. Most items are dropped shipped from manufacture.

Vortech Universal Big Block Chevy Carbureted Supercharger System

This is a "universal" supercharger kit designed for vehicles equipped with carbureted big block Chevrolet engines.

  • This system requires the installer to supply a high volumefuel pump and properly jetted 4150 style carburetor unit (with mechanical secondaries)
  • We have verified this kit to fit on 1964-1972 Chevelle / Malibu models equipped with a cowl induction hood. Minor bottom-side hood support modifications may be required dependingupon the type of intake manifold installed on the engine.
  • This kit may also fit other Chevrolet models, but has not been confirmed
  • Horsepower gains (depending onboost levels, engine volumetric efficiency etc.): 30-75%+
  • Supplied pulley ratio will produce approximately 5-6 psi at 5000 rpm on a mildly modified 454" engine
  • Installation time: 4-10 hours depending on application

Included Components

  • V7 YSi-trim supercharger with 3.33" pulley 10-rib (CW rotation; straight discharge)
  • Cast aluminum mounting bracket with all necessary hardware
  • New twin 1/2" thick billet aluminum mounting plates for rigid supercharger attachment
  • Supercharger drive:
    • Belt tensioner with dual bearing, billet aluminum idler pulley
    • Includes 61.8 10-rib belt, billet aluminum accessory drive crank pulley (3 groove) with hard anodize finish and spacer for use with long water pump spacing
    • 10-rib billet aluminum supercharger crank pulley with hard anodize finish (7 diameter)
      o Available drive component accessories to convert to 36 or 50mm wide 8mm pitch cog drive. See optional components below for part numbers
  • Supercharger oil drain assembly
  • Supercharger oil feed assembly

"Tuner" Systems

Tuner system does not come with the Carb. Enclousre and discharge assembly

Warranty Information

No warranty on race/heavy-duty superchargers.

Please Note

This system was designed to fit on engines equipped with a "long" water pump. Vortech includes a 3-groove accessory drive crank pulley (for use with "long" style water pumps only). If this kit is to be installed on an engine equipped with a "short" water pump, a custom accessory drive crank pulley and spacer will be required.

For engines equipped with power steering, a remote reservoir (GM "type 2") style pump will be required as well as an optional Vortech power steering pump bracket and pulley assembly. Depending on the vehicle, power steering lines may require fabrication.

Power steering pump: OE on 1987 GM Pontiac Sunbird, NAPA # 20-874

Vortech power steering bracket/pulley assembly: V4GA110-010

PRICE MATCH! We are the 1st and largest distributor in the world for superchargers and supercharger parts. If you find this system for a lower price through another dealer, give us a call at 818-518-9889 or email, provide the Pricing and Store, and we will try our best to beat the price for you! You will see why people prefer us over others. is an Authorized distributor, be cautious from other companies that are not Authorized Distributors.
Your IP Address is:
Copyright © 2020 SuperchargersOnline. Powered by SuperchargersOnline