TEL: 818-518-9889
Email: Sales@SuperchargersOnline.com
We Ship Worldwide

Supercharger News; New EdelBrock E-Force Supercharger System!

Published: Sunday 04 December, 2011





New EdelBrock E-Force Supercharger System!



Edelbrock is excited to announce the release of their E-Force Supercharger system for 2005-2009 Ford Mustangs equipped with a 4.6L 3V. This all-new design is engineered and manufactured by Edelbrock and features an Eaton® Twin Vortices Series (TVS®) GEN VI rotor assembly - the same internals used on the new Corvette ZR-1. This combination improves 2005-2009 4.6L 3-valve Mustangs to an impressive 466 horsepower and 439 ft./lbs. of torque on only five (5) pounds of boost; this is more power per psi than any Mustang supercharger system on the market today.

The supercharger assembly is integrated into Edelbrock's unique intake manifold for a truly seamless design with minimal components. The intake features 15" long runners for maximum low-end torque and an integrated bypass valve that helps reduce parasitic loss under light throttle, which improves mileage potential. Keeping the air cool is a 110 square inch high capacity air to water intercooler - the largest of its kind available on the market today - and dual core low temp heat exchange.

This complete Edelbrock E-Force supercharger kit includes everything you need to bolt it on under the hood of a 2005-2009 Mustang 4.6L 3V, including supercharger/manifold assembly, air inlet with 85mm throttle body, fuel injectors, air-to-water intercooler, spark plugs, coil covers and handheld flash programmer to properly tune the factory ECU for the added power. Edelbrock offers an available 3-Year/36,000 mile warranty and 50-State emissions legal EO is pending.

Features Include:

  • More horsepower per psi than any other Mustang system on the market
  • 2300cc (140 cubic inch) Eaton® TVS® GEN VI rotor assembly
  • Unique intake manifold design with 15" long runners for increased low-end
    torque
  • Installs under the stock hood while maintaining factory accessories
  • Air Inlet Assembly with 85mm throttle body
  • 41lbs Fuel Injectors
  • Air-to-Water Intercooler
  • HTO Spark Plugs
  • Mass Air Sensor
  • High Flow Air Filter
  • Hand Held Flash Tuner Programmer
  • Integrated By-pass Valve
  • Available 3 Year/36,000 mile warranty
  • The most efficient system available - 466 HP and 439 ft./lbs of Torque on only 5 lbs. of boost!
  • Made in USA for absolute quality and performance




1. 85mm Throttle Body

  • Specially designed for this supercharger system
  • Built to O.E.M. standards
  • Constructed of 356 T6 cast aluminum body and brass throttle blade
  • Injection molded gearing ensures safe operation





  • 2. Front Drive, Front Inlet Design

  • Designed with a short intake path without the use of a jack shaft
  • Front drive operating is reliable, compact, and great looking
  • Minimal parasitic loss and airflow restriction

  • 3. Integrated By-pass Valve

  • Bypass valve helps maintain fuel economy
  • Valve is integrated into the supercharger housing for a leak-free & safe operating system
  • Vacuum operated valve divides the inlet and outlet plenums of the supercharger and reacts to your demand for more horsepower

  • 4. 2300 CC/Rev Twin Vortices (TVS)

  • Brand new TVS rotors are manufactured by Eaton
  • A four lobe configuration with 160 degree of twist improves volumetric and thermal efficiency, maximizing airflow with less work from the engine
  • Operates more quietly than other supercharger kits




  • 5. High Capacity Intercooler

  • 110 square inches of cooling capacity
  • Reduces volatility of fuel air charge that enters the combustion chamber
  • Increases availability for oxygen to burn fuel more efficiently, creating increased horsepower




  • 6. 15” Intake Runner Length

  • The supercharger sits low in the valley, allowing for long smooth 15” intake runner path length an minimal bends – an industry first
  • Longer runners maximize air velocity for exceptional low end torque




  • 7. Self Contained Oil System

  • This system has a 100,000 mile service interval
  • No oil plumbing to install or fabricate
  • No drilling or tapping of oil pans like some supercharger kits




  • 8. High Flow Fuel Injectors (41 Lbs/Hr.)

  • Higher flow injectors deliver more fuel when needed on demand
  • Compatible with factory fuel rails and connectors




  • Revolutionary design offers more Horsepower Per PSI than any other system on the market!!


    EdelBrock E-Force Supercharger System for 2005-2009 Ford Mustang with 4.6L - Click Here



    Back
    Your IP Address is: 54.80.16.75
    Copyright © 2017 SuperchargersOnline. Powered by SuperchargersOnline